BJH

Migomag Digital 220MP
A single phase multi process MIG, TIG (DC), and ARC welder
 
Stick welding (MMA)
-Suitable for electrodes up to 5 mm

TIG welding (DC)
-Lift arc
-2 T or 4 T operation
-Adjustable Post gas
-Adjustable down slope

MIG welding
-Wire feeder built in
-Adjustable arc voltage from 14 to 28V
-Adjustable wire speed from 1 to 15 m/min
-Takes a 15 kg spool of wire
-Suitable for mild steel, stainless steel between 0.6 mm to 1.2 mm
-Direct or reverse wire polarity
-2 stroke or 4 stroke mode
-Adjustable Post gas
-Gas purge and cold wire inch
-Adjustable burn back - to adjust wire length at the end of the welding
-Lineary adjustable inductor - to allow total variation of the arc (soft or hard) and limit the amount of spatters.

Comes with:
-TIG Torch
-MIG Torch
-Arc & Earth Leads
-Gas regulator

 
Migomag Digital 280MP
A three phase multi process MIG, TIG (DC) and ARC welder
 
STICK WELDING (MMA)
-Suitable for electrodes up to 5 mm

TIG welding
-Lift arc
-2 T or 4 T operation
-Adjustable Post gas
-Adjustable down slope

MIG welding
-Wire feeder built in
-Adjustable arc voltage from 14 to 28V
-Adjustable wire speed from 1 to 15 m/min
-Takes a 15 kg spool of wire
-Suitable for mild steel, stainless steel between 0.6 mm to 1.2 mm
-Direct or reverse wire polarity
-2 stroke or 4 stroke mode
-Adjustable Post gas
-Gas purge and cold wire inch
-Adjustable burn back - to adjust wire length at the end of the welding
-Lineary adjustable inductor - to allow total variation of the arc (soft or hard) and limit the amount of spatters.
- Spot MIG welding with adjustable spot's length
-Intermittent MIG welding with adjustable spot's length and frequency.
 
Comes with:
-TIG Torch
-MIG Torch
-Arc & Earth Leads
-Gas regulator